The electrical conductivity of copper is second only to that of silver, reaching 58.5 MS/m (million Siemens per meter) at 20℃. This characteristic makes it the preferred choice for high-voltage and high-current scenarios. In contrast, the electrical conductivity of aluminium is approximately 37.7 MS/m, which is only 64.5% of that of copper. Under the same cross-sectional area, the current-carrying capacity of aluminum busbars is approximately 30% lower than that of copper busbars. To achieve the same electrical conductivity, the cross-sectional area of aluminum busbars needs to be increased, resulting in an increase in volume and weight.
However, the high density of copper (8.96g/cm³) also brings drawbacks. In scenarios where lightweight design is required, aluminum bars (with a density of 2.7g/cm³) can still achieve a total weight lower than that of copper bars by increasing their cross-sectional area. For instance, in the connection of battery packs for new energy vehicles, aluminum bars are widely adopted due to their weight advantage, although surface oxidation treatment is needed to enhance their corrosion resistance.

