Environmental adaptability of copper bars: Challenges of corrosion and temperature

Jul 04, 2025

Leave a message

Copper has excellent corrosion resistance in dry environments, but it is prone to form patina in high-humidity or sulfur-containing gas environments, resulting in an increase in contact resistance. The surface of aluminum is prone to form a dense oxide film, which can instead prevent further corrosion. However, the resistance of the oxide film (about 10⁻⁶Ω·cm²) is much higher than that of the copper substrate (10⁻⁶Ω·cm²), and it needs to be improved through tin plating, nickel plating or anodic oxidation treatment.

In terms of the influence of temperature on electrical conductivity, the temperature coefficient of resistance of copper (0.0043/℃) is lower than that of aluminum (0.0041/℃), but the coefficient of thermal expansion of aluminum (23.6×10⁻⁶/℃) is 1.4 times that of copper (16.5×10⁻⁶/℃). In scenarios with significant temperature fluctuations, the thermal expansion and contraction of aluminum bars are more pronounced, which may cause loosening at the connection points. This can be alleviated through structural design (such as reserving expansion gaps) or by using flexible connectors.